Furuno FCR-2107 series Скачать руководство пользователя страница 234

Страница: 234 / 556

7. Vector Chart Material

7-62

Tracking page

Own ship past tracks

System:

plot own ship’s tracks using system-fed position.

Primary:

plot own ship’s past track with position fed from the primary

sensor.

Secondary:

plot own ship’s past track with position fed from a secondary

sensor.

Style:

choose time stamp position for past track (indicated by Tick or

Point)

Length:

choose length of past track

Labels:

choose label interval

Target past positions

Density:

Choose density of past position of points.

Style:

Choose style of presentation of target's past position.

Events:

These marks are based on voyage log records.

User Event:

display event symbols on ECDIS, where the system has

recorded an event based on conditions you have set (Type: User and
Auto).

Auto Event:

display automatically entered event symbols, where the

system has recorded an event based on conditions you have set (Type:
Ship and Alarm).

Positions

display the latitude and longitude of an event.

Note 1:

MOB event is always visible.

Note 2:

You can choose period of time to display event marks in the list

box "Show".

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FCR-2107 series

Отзывы:

Furuno FCR-2107 series, Руководство оператора, Страница: 234 / 556

Результаты поиска

Содержание FCR-2107 series

Отзывы: