Furuno FCR-2107 series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 556

Furuno FCR-2107 series Скачать руководство пользователя страница 3

i

Important Notices

General

•

The operator of this equipment must read and follow the descriptions in this manual. Wrong operation or
maintenance can cancel the warranty or cause injury.

•

Do not copy any part of this manual without written permission from FURUNO.

•

If this manual is lost or worn, contact your dealer about replacement.

•

The contents of this manual and equipment specifications can change without notice.

•

The example screens (or illustrations) shown in this manual can be different from the screens you see on your
display. The screens you see depend on your system configuration and equipment settings.

•

Save this manual for future reference.

•

Any modification of the equipment (including software) by persons not authorized by FURUNO will cancel the
warranty.

•

All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

How to discard this product

Discard this product according to local regulations for the disposal of industrial waste. For disposal in the USA, see
the homepage of the Electronics Industries Alliance (http://www.eiae.org/) for the correct method of disposal.

How to discard a used battery

Some FURUNO products have a battery(ies). To see if your product has a battery(ies), see the chapter on
Maintenance. Follow the instructions below if a battery(ies) is used.

In the European Union

The crossed-out trash can symbol indicates that all types of batteries must not be
discarded in standard trash, or at a trash site. Take the used batteries to a battery
collection site according to your national legislation and the Batteries Directive
2006/66/EU.

In the USA

The Mobius loop symbol (three chasing arrows) indicates that Ni-Cd and lead-
acid rechargeable batteries must be recycled. Take the used batteries to a battery
collection site according to local laws.

In the other countries

There are no international standards for the battery recycle symbol. The number
of symbols can increase when the other countries make their own recycling
symbols in the future.

Cd

Ni-Cd

Pb

«
1
2
3
4
5
...
»

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов