Furuno FCR-2107 series Скачать руководство пользователя страница 113

Страница: 113 / 556

4. Tracked Target (TT) Operation

4-15

4.10.2 Past position display attributes

You can select the number of past point points to display per plotting interval and the color of past position points.

1. Use the trackball to select the Symb DISP box at the right side of the screen then push the left button. Select the

Tracking page.

2. Select the Density box in the Target past positions window, spin the scrollwheel to select Sparse, Medium or

Dense as appropriate then push the scrollwheel.

3. Select the Style box, spin the scrollwheel to select Points or Points and dots as appropriate then push the

scrollwheel.

4. Click the Close window button (X) at the upper right corner to close the menu.

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FCR-2107 series

Отзывы:

Furuno FCR-2107 series, Руководство оператора, Страница: 113 / 556

Результаты поиска

Содержание FCR-2107 series

Отзывы: