Furuno FCR-2107 series, Руководство оператора

Страница: 361 / 556

13. Notes
13-9
To add a new Notes record by Add button:
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Click the Add button. This adds a new Notes record to the end of record, and it is a copy of current Notes
record.
3. Modify position of Notes record. For how to modify position, see section 13.5.3 Changing Notes record
position.
4. Modify other data of Notes record as appropriate. For how to modify other data in a Notes record, see section
13.5.4 Changing other data of Notes record.
13.5.2 Choosing Notes record to modify
The Current box in the Plan Notes dialog box shows the Notes currently selected for modification. To choose a
different Notes the following methods are available:
•
Enter desired record number in the Current box, using the scrollwheel; spin the scrollwheel to choose record
number then push the scrollwheel.
•
Place the cursor on desired Notes in the electronic chart area, then push the scrollwheel.
13.5.3 Changing Notes record position
To change the position of a Notes, two choices are available:
•
Enter latitude and longitude in the Position field on the Edit page.
•
Drag and drop Notes mark using the trackball and left button.
Entering latitude and longitude in position field
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Choose desired Notes, following section 13.5.2 Choosing Notes record to modify.
3. Enter co-ordinate in Lat (Lon) field as appropriate. Spin the scrollwheel to change digit then push the
scrollwheel to confirm.
Dragging and dropping Notes to new WPT position
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Use the trackball to place the cursor on the Notes you wish to move.
3. Press and hold down the left button while rolling the trackball to position the Notes mark where desired. Keep
the button pressed and held down while you move the cursor and release it when the cursor is at position
desired.
13.5.4 Changing other data of Notes record
To change function range or character data of Notes, such as range and text, do the following:
1. Choose desired Notes, following section 13.5.2 Choosing Notes record to modify.
2. Place the cursor in the desired edit box, spin the scrollwheel to choose desired value, then push the scrollwheel
to confirm.
13.5.5 Deleting a Notes record
To delete a Notes record, do the following:
1. Open the Edit page of the Plan Notes dialog box then check Enable changes.
2. Choose desired Notes, following section 13.5.2 Choosing Notes record to modify.
3. Click the Delete button.