Furuno FCR-2107 series Скачать руководство пользователя страница 160

Страница: 160 / 556

6. ECDIS Overview

6-6

Information in route sidebar

The following information is shown in the route sidebar:

Information from route monitoring:

Route: Name of monitored route

•

Plan Speed:

Planned speed to approach "To WPT".

•

Plan:

Planned course between previous WPT and "To

WPT".

•

Route:

Calculated set course to follow the monitored

route, including off track, drift and gyro error
compensation.

•

Ch LIM:

Planned width of channel to approach "To

WPT".

•

Off track:

Perpendicular distance the ship is from the

intended track.

•

To WPT:

The waypoint which the ship is approaching.

•

Dist WOP (Wheel Over Point):

Distance to the point

where rudder order for course change at "To WPT"
will be given.

•

Time:

Time to go to WOP (dd:hh:mm:ss).

•

Turn RAD:

Planned turning radius at "To WPT".

•

Turn rate:

Calculated rate of turn which is based on

current speed and planned turning radius.

•

Next WPT:

The WPT following the "To WPT".

•

Next:

Planned course between "To WPT" and "Next

WPT".

The following information is calculated from data of
positioning sensors and from route monitoring data:

•

Route

•

Off track

•

Dist WOP

•

Time

•

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FCR-2107 series

Отзывы:

Furuno FCR-2107 series, Руководство оператора, Страница: 160 / 556

Результаты поиска

Содержание FCR-2107 series

Отзывы: