Furuno FCR-2107 series Скачать руководство пользователя страница 355

Страница: 355 / 556

13. Notes

13-3

13.2 Using

Notes

To prepare Notes, do the following:

1. Place the cursor on Notes in the status bar, then click the

Plan

Monitor

button as appropriate. If no Notes is

chosen, the Notes menu (shown below) appears in addition to the Monitor Notes dialog box or Plan Notes
dialog box.

2. If no menu appears, click the same button once more to open the menu.

Activate Monitor/Plan mode:

User can switch Notes mode between plan and

monitor. Using

Go Monitor mode> Go Monitor mode,

Notes used in the planning mode can be

switched directly to the monitoring mode. Using

Go Plan mode> Go Plan mode,

Notes used in the monitoring mode can be

switched directly to the planning mode.

Select:

Chooses Notes to use; monitor or planning mode.

Unselect:

Unselect removes Notes from active use.

Create:

Creates new Notes. Notes can be named, using up to 30 alphanumeric

characters.

Backup and Restore:

User can make backup copy from Notes or restore from

backup media.

Report:

Generates tabulated report from chosen Notes.

Note:

If you want Notes to be displayed on the electronic chart, make sure that Notes options are turned on in the

Mariner page of the Chart Display dialog box.

THIS IS A TEST

1. 2. 3. 4.

Position
marker

Position marker
and text

Position marker
and range marker

Position marker,
text, and range marker

Four different variations as examples of how Notes is presented on the chart area:

1. Position

marker

2. Position marker and text

3. Position marker and range marker

4. Position marker, text and range marker

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FCR-2107 series

Отзывы:

Furuno FCR-2107 series, Руководство оператора, Страница: 355 / 556

Результаты поиска

Содержание FCR-2107 series

Отзывы: