Furuno FCR-2107 series Скачать руководство пользователя страница 130

Страница: 130 / 556

5. AIS Operation

5-4

5.4 AIS

Symbols

When the AIS is turned on, AIS targets are marked with appropriate AIS symbol as below.

SYMBOL

STATUS

REMARKS

Activated
target

ROT higher
than preset
ROT

Dangerous
target

Lost target

Target selected
for data display

All AIS symbols shown with thick line.
Color is selectable from menu.

Displayed for turning ship.

Displayed when CPA/TCPA is within
CPA/TCPA LIMIT. Red in color. Flashing
until acknowledged.

“X” overlaid on a lost target. Red in
color. Erased after acknowledged.

Broken square is overlaid on target
selected to display its data. A, B or C
shown to indicate data box location (at
the right side of the screen).

Real AtoN

Virtual AtoN

Base Station

Airborne SAR aircraft

AIS symbols

Note 1:

The equipment continues to process AIS targets when the AIS feature is switched off. When the AIS is

again turned on, symbols are immediately displayed.

Note 2:

AIS symbols are momentarily erased after the screen is redrawn when the heading is changed from the

Head-up mode.

Note 3:

When no AIS data is received, the message "AIS receive error" appears in the text window. Check the AIS

transponder.

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FCR-2107 series

Отзывы:

Furuno FCR-2107 series, Руководство оператора, Страница: 130 / 556

Результаты поиска

Содержание FCR-2107 series

Отзывы: