manualshive.com logo in svg

Furuno FCR-2107 series, Руководство оператора, Страница: 190 / 556

Поделиться
Скачать
Furuno FCR-2107 series Скачать руководство пользователя страница 190

7. Vector Chart Material 

 

7-18 

7.3.4 

Using the Failed SENC conversion window 

If the system is unable to convert ENC into SENC without any error or failure, the Failed SENC conversion window 
appears with a list of failed ENCs. Status of Failure means that the system completely failed to convert the ENC into 
the SENC and thus the ENC cannot be used. 

Status of Errors means that the system detected minor or major errors in the conversion of the ENC into the SENC. 
Check the content of Conv. History and cell status to see if the error was minor or major. Major errors are indicated 
as NON ENC in Conv. History.

 

Note that the status of errors together with NON ENC in Conv History clearly 

indicate that this chart is not up-to-date and thus it does not fulfil SOLAS requirements. Get the latest edition of this 
chart from the publisher immediately. 

"Failed" means that the system completely failed to convert the ENC into the SENC and thus the ENC cannot be 
used

. 

Failure clearly indicates that this chart is not up-to-date and thus it does not fulfil SOLAS requirements. Get 

the latest edition of this chart from the publisher immediately. 

The Failed SENC conversion window contains two buttons. 

Conv. History

 opens the conversion history log and 

Cell Status

 opens the window of chosen item in the list of Failed SENC conversions window. 

The 

Conv. History 

button is used to display 

the conversion log. The conversion log shows 
the status of converted ENCs. For further 
details about the results of conversions, see 
section 7.3.5 Using SENC conversion history 
log. 

 

 

Click the 

Cell Status

 button, and a Cell Status window appears. 

 

Then you can click the 

Conv Log

 button to view a detailed description of errors and failures detected during SENC 

conversion (see example below).  

 

Содержание FCR-2107 series













































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов