Fuji Xerox DocuPrint 5105 d, Руководство пользователя

Страница: 268 / 419

268
6 Troubleshooting
016-722 The staple position specified is not supported by the machine, or the paper size specified is not
supported by the finisher.
Confirm the staple position and the paper size, and try printing again.
016-723 The punch position specified is not supported by the machine, or the paper size specified is not
supported by the finisher.
Confirm the punch position and the paper size, and try printing again.
016-724 The specified staple and punch position combination is unsupported.
Specify the staple and punch positions on the same side, and try printing again.
016-726 Unable to automatically select a printer language because PostScript data was sent with no Adobe
PostScript 3 Kit installed.
The Adobe PostScript 3 Kit must be installed.
016-728 An unsupported tag is included in the TIFF file.
Confirm the print data.
016-729 Unable to print because the number of colors or the resolution of the TIFF file exceeds the allowed
range.
Change the number of colors or resolution for the TIFF file, and execute the operation again.
016-731 Unable to print TIFF data because it was interrupted.
Retry printing.
016-732 The form specified by emulation has not been registered at the host side.
Resend the form data.
016-733 Probable causes are as follows:
1 Unable to obtain the IP address (the string after "@" in the destination e-mail address) when e-mail is
sent.
2 DNS server was unable to resolve the Internet address (the string after "@") by the DNS server when
e-mail is sent.
For 1), confirm the e-mail address.
For 2), confirm the DNS server address.
016-738 Unsupported paper size was specified when specifying booklet creation with PostScript.
Specify a paper size supported for booklet creation, and try printing again.
016-739 Used an unsupported combination of document size and paper size when specifying booklet creation
with PostScript.
Specify a combination of document size and paper size supported for booklet creation, and try printing
again.
016-740 Used an unsupported paper tray when specifying booklet creation with PostScript.
Specify a paper tray supported for booklet creation, and try printing again.
016-741
016-742
016-743
016-744
016-745 An error occurred during the update process of the machine.
Switch off the machine power, make sure that the display is blank, and then switch on the machine
power. If the error still is not resolved, contact our Customer Support Center.
016-746 An unsupported feature is included in the received PDF.
Print using a print driver.
016-747 The memory became insufficient when using the Repeat Image feature and the Annotations features
simultaneously.
Take one of the following measures:
• Increase the annotation image size.
• Reduce the usage of Repeat Image.
016-748 Unable to print because of insufficient hard disk space.
Reduce the number of print pages by dividing the print data or by printing one copy at a time when
printing multiple copies.
Error Code Cause/Remedy