Fuji Xerox DocuPrint 5105 d, Руководство пользователя

Страница: 16 / 419

16
Safety Notes
To keep this product in a good performance
and condition, always use it in the following
environment:
• Temperature: 10 - 32
°
C
• Humidity: 15 - 85%
When the product is left in a chilly room and
the room is rapidly warmed up by heater, dew
condensation may form inside the product
and cause a partial deletion on printing.
Operational Safety
The operator's product maintenance
procedures are described in the customer
documentation supplied with this product. Do
not carry out any other maintenance
procedures not described in the
documentation.
This product features safety design not to
allow operators access to hazard areas. The
hazard areas are isolated from operators by
covers or protectors which require a tool to
remove. To prevent electric shock and injuries,
never remove those covers and protectors.
To avoid the risk of electric shock and a fire
accident, switch off and unplug the product
promptly in the following conditions, then
contact your local Fuji Xerox representative.
• The product emits smoke or its surface is
unusually hot.
• The product emits unusual noise or odor.
• The power cord is cracked or worn down.
• A circuit breaker, fuse or any other safety
device is activated.
• Any liquid is spilled into the product.
• The product is soaked in water.
• Any part of the product is damaged.
Do not insert any object into slots or openings
of this product.
Do not put any of the followings on the
product:
• Liquid container such as flower vases or
coffee cups
• Metal parts such as staples or clips
• Heavy objects
If liquid is spilled over or metal parts are
slipped into the product, it may cause electric
shock or a fire accident.
Do not use conductive paper such as origami
paper, carbonic paper or conductively-coated
paper. When paper jam occurs, it may cause
short-circuit and eventually a fire accident.
When cleaning this product, use the
designated cleaning materials exclusive to it.
Other cleaning materials may result in poor
performance of the product. Never use
aerosol cleaners to avoid catching fire and
explosion.
If you need to pull out a tray to remove paper
jam, contact your local Fuji Xerox
representative. Do not pull out a tray,
otherwise it may cause injuries.
When you play the media (e.g., CD-ROM,
DVD) supplied with the product, always use
said media-enabled device. Otherwise, large
sound may damage its speakers or your ears.
Laser Safety
CAUTION: Any operations or adjustments not
stated in the operation manual may cause
hazardous light exposure and eventually burn
injuries or loss of eyesight.
This product has been tested and found to
comply with the Class 1 Laser Equipment
requirements defined by the international
standard IEC60825 and has no light exposure
hazard. The product has no hazardous light
emission as it features light protection
components and covers to shut in all light
beam during operation and maintenance.
Always follow all warning instructions marked
on or supplied with this product.
To avoid the risk of burn injuries and electric
shock, never touch the area with the "High
Temperature" or "High Voltage" marks on.