OBID i-scan
®
System-Manual
ID ISC.MR200
FEIG ELECTRONIC GmbH
Page 34 of 144
H40801-5e-ID-B.doc
RF-POWER
1
:
Defines the RF output power.
Bit:
7
6
5
4
3
2
1
0
Function
0
0
LEVEL
LEVEL
Level of the RF output power
LEVEL
RF-POWER
4
1.00 W
7
1,75 W
Notes:
•
A monitor is continuously checking the RF hardware and if an error occurs the
Reader answers every command with the error code 0x84.
•
Changing of RF-POWER only becomes effective after writing / saving configuration
block CFG3 to EEPROM and a reset of the Reader
FU-COM:
Defines if the Reader itself try to controls a function unit in the RF Line.
Bit:
7
6
5
4
3
2
1
0
Function
0
0
0
0
0
0
0
STune
STune
defines whether the Reader try to tune the antenna connected to the Reader after
the Reader power up. This option works only if a ID ISC.DAT is integrated in the an-
tenna connected to the Reader and if the ID ISC.DAT has DC power.
b0
disabled
b1
enabled
1
A plausibility check is performed by writing this parameter to the Reader. If an error occurs the Reader an-
swers with STATUS = [0x11].
