Feig Electronic IBID i-scan ID ISC.MR200, Руководство пользователя, Страница: 110 / 144

OBID i-scan
®
System-Manual ID ISC.MR200
FEIG ELECTRONIC GmbH Page 110 of 144 H40801-5e-ID-B.doc
Supported ISO15693 Host commands
7.1.
)
Supported ISO15693 Host commands for ISO15693 Transponders
The command codes listed in the following table supports the various Transponder commands and
operations that are available for each ISO15693 Transponder type.
7.1.1. EM Microelectronics (EM4034)
Chip ID: 1h = x00001xxb (Bit 46 - 42 of UID)
Memory organization: 14 x 4 Byte = 448Bit
Number of blocks 14 (user area: 3 – 11)
Block size 4 byte
WR-OPTION 0
Command
Code
Function Mode Comment
non-
addressed
addressed select
0x01 Inventory
√
- -
0x02 Stay Quiet
√
-
√
-
0x22 Lock Multiple Blocks - - - -
0x23 Read Multiple Blocks
√
√
* √
-
Multiple Read
0x24
Write Multiple Blocks
**
√ √ √
-
0x25 Select - - - -
0x26 Reset to Ready
√ √ √
-
0x27 Write AFI - - - -
0x28 Lock AFI - - - -
0x29 Write DSFID - - - -
0x2A Lock DSFID - - - -
0x2B Get System Information - - - -
0x2C
Get Multiple Block Security
Status
- - - -
*
Reading of one block in non addressed mode is only possible, if parameter “Read Mode” in
CFG4 is set to “10: Multiple Read“.
**
The WR-OPTION will be set automatically by the FEIG Readers if the WR-OPTION parameter
in “CFG4 Transponder Parameters” is set to “00: automatically set”.