OBID i-scan
®
System-Manual
ID ISC.MR200
FEIG ELECTRONIC GmbH
Page 29 of 144
H40801-5e-ID-B.doc
READER-MODE:
By means of this byte, the Reader mode can be defined.
Bit:
7
6
5
4
3
2
1
0
Function:
BRM-E
NF-E
0
0
0
0
0
SCAN-E
SCAN-E:
b0:
ISO Host Mode
(see chapter
6. Protocols for ISO15693 Host Commands
)
This bit combination activates the ISO15693 Host Mode. If the ISO15693
Host Mode is enabled the ISO15693 Host commands will be available
b1:
Scan Mode
This bit activates the Scan Mode. If the Scan Mode is enabled there are no
ISO15693 Host commands available
BRM-E:
b1:
Buffered Read Mode
This bit activates the Buffered Read Mode. If the Buffered Read
Mode is enabled there are no ISO15693 Host commands available
NF-E:
By setting of this bit the Notification Mode can be enabled.
(Hardware version FE556/4 is necessary).
b0:
Off
b1:
On (only together with BRM-Mode)
The following table lists the bit combinations for the reader modes:
Bit
7
6
5
4
3
2
1
0
Host-Mode
0
0
0
0
0
0
0
0
Scan Mode
0
0
0
0
0
0
0
1
Buffered Read
Mode
1
0
0
0
0
0
0
0
Reader Mode
Notification Mode
1
1
0
0
0
0
0
0
