Feig Electronic IBID i-scan ID ISC.MR200, Руководство пользователя, Страница: 119 / 144

OBID i-scan
®
System-Manual ID ISC.MR200
FEIG ELECTRONIC GmbH Page 119 of 144 H40801-5e-ID-B.doc
7.1.10. NXP (I-Code SLI-S)
Chip ID: 2h = 00000010b (Bit 47 - 40 of UID)
Memory organization: 40 x 4 Byte = 1280Bit
Number of blocks 40 (user area: 0 – 39) Number of pages 10 (user area: 0 – 9)
Block size 4 byte Page size 16 byte = 4 Blocks
WR-OPTION
*
0
WR-OPTION
*
0
Command
Code
Function Mode Comment
non-
addressed
addressed select
0x01 Inventory
√
- - -
0x02 Stay Quiet
√
-
√
-
0x22 Lock Multiple Blocks
√ √ √ √
0x23 Read Multiple Blocks
√
√
**
√ √
Single Read
0x24 Write Multiple Blocks
√ √ √ √
0x25 Select
√
-
√
-
0x26 Reset to Ready
√ √ √ √
0x27 Write AFI
√ √ √ √
0x28 Lock AFI
√ √ √ √
0x29 Write DSFID
√ √ √ √
0x2A Lock DSFID
√ √ √ √
0x2B Get System Information
√ √ √ √
0x2C Get Multiple Block Security
Status
- - - -
∗
The WR-OPTION will be set automatically by the FEIG Readers if the WR-OPTION parameter
in “CFG4 Transponder Parameters” is set to “00: automatically set”.
**
Reading of more than one block in non addressed mode is only possible, if parameter
“Read Mode” in CFG4 is set to “01: Single Read“.