Feig Electronic IBID i-scan ID ISC.MR200, Руководство пользователя

Страница: 84 / 144

OBID i-scan
®
System-Manual ID ISC.MR200
FEIG ELECTRONIC GmbH Page 84 of 144 H40801-5e-ID-B.doc
5.13. [0x85] Set System Timer
The Set System Timer command sets the internal system timer of the CPU. The actual internal system
time is stored in each data set after a Transponder select, read or write command.
Host
→
Reader
1 2 3 4...7 8...9
9 COM-ADR [0x85] TIMER CRC16
Host
←
Reader
1 2 3 4 5...6
6 COM-ADR [0x85] STATUS CRC16
TIMER:
Byte 4 5 6...7
TIME h min ms
0...23 0...59 0...59999
Note:
•
The internal system timer is not a real-time clock (RTC) and the accuracy cannot be guaran-
teed.
5.14. [0x86] Get System Timer
The Get System Timer command reads the internal system timer of the CPU.
Host
→
Reader
1 2 3 4...5
5 COM-ADR [0x86] CRC16
Host
←
Reader
1 2 3 4 5...8 9...10
10 COM-ADR [0x86] STATUS
1
TIMER CRC16
TIMER:
Byte 5 6 7...8
TIMER h min ms
0...23 0...59 0...59999
Note:
•
The internal system timer is not a real-time clock (RTC) and the accuracy cannot be guaran-
tied.