FEI Quanta FEG 250, Руководство пользователя

Страница: 97 / 228

Operating Procedures: Recording Movies (Saving Multiple Images)
5-25
MOVIE PROCEDURE
The red dot button starts the recording of all live electron image
quads at the same moment – no video / images are stored for paused
quads. When a quad is paused during the video recording, the storing
of the video frames is interrupted but the video streams keep
synchronization for the next resuming.
When the red dot representing ‘Start’ is pressed, it turns to a red
square , representing ‘Stop’. Pressing the red square then stops the
recording of the video in all quads and closes all video files.
The red dot with the timer (displayed in the top right-hand corner)
indicates that recording is active in this quad. The Pause symbol
indicates that the record is running but the data from this quad are not
stored (the quad is paused).
The timer indicates the time estimation (in the hh:mm:ss format)
remaining to the end of the video. This is calculated from the average
disk space consumption and the disk free space.
Record Movie Procedure
1. Open the Preferences… / Movie tab. In the Timer module tick the
Movie or TIF check box and select the desired Delay time (the
period between stored frames).
2. In the File module fill in the File Name and give the Save in
directory path. Fill in the Numeric Seed value and the Video File
Size . Select the File Type and choose whether to record the
databar with the Record Databar check box.
3. Pause those quads which you don’t want to record. Set up the
imaging parameters in the live quad(s).
4. Select the File menu / Record Movie (a tick mark) or click the
toolbar / red dot button. When the scan resolution is higher than
1024 × 884 the dialogue appears.
5. Choose either of the offered Resolution values at which the movie
starts to record.
6. Select the File menu / Record Movie again or click the toolbar / red
square button to stop the movie recording.