FEI Quanta FEG 250, Руководство пользователя

Страница: 219 / 228

System Options: Specimen Holder Kit Option
9-71
Specimen Holder Kit Option
The Specimen Holder Kit is Universal. The interfacing parts allow the
fitting of all the common components to the Inspect S, Inspect F,
Quanta and Quanta FEG. Major holders in the kit locate with a 2 pin
system originating from the stage rotation head, through the interface
piece, to the holder. All interfacing parts have a 3 point contact to
minimize vibration. The Specimen Holder Kit comprises of:
• Older type 50 mm stage adapter
• Interface pillar for all multi-fittings
• 16 Position stub holder (spring held)
• Angled stub holder, 4 at 45°, 2 at 0°
• Analytical holder 2× 1 inch samples
• 25 mm and 32 mm diameter Polished mount holders
• 2× Clamp stubs
• Eucentric stub holder Quanta 450, Quanta FEG 450
• Eucentric stub holder Quanta 650, Quanta FEG 650
• 1× No.10 Torx driver
• 1× No.6 Torx driver
FIGURE 9-58 SPECIMEN HOLDER KIT OPTION
LOCATION POSITIONS
The interface parts and all fitting holders have a 2 pin / 2 hole location
system. This is present so that holders can be positioned in the same
orientation each time they are fitted. All stages have 2 holes, one is
round and the other is a slot. This will allow the stage location system
to work with a holder for precise specimen position.
This works directly from the Home condition of the stage. The stage
needs to be homed before fitting of the Holder interface components.