Fagor CNC 8060, Руководство по установке

Страница: 567 / 698

Installation manual.
CNC 8060
CNC 8065
CON
F
IGUR
ING AN AXIS.
11.
Multi-axis mana
gemen
t.
·567·
(R
EF
: 1709)
Configuring the external feedback (direct feedback).
Type of feedback input for the axis.
The internal feedback (motor) of both axes is located at the drive. Parameter
COUNTERTYPE indicates the location of the external (direct) feedback of the axis; at the
remotte modules (4 inputs per module, differential TTL, 1 Vpp sinusoidal), at the free input
of a Sercos drive or at the local feedback inputs of the central unit.
When using a Sercos drive, the axis can use the second free feedback input of that drive
or of another one. When the axis uses the second feedback input of another drive, the CNC
does not allow homing the axis; therefore, the axis must have absolute feedback.
Parameter. Meaning.
COUNTERTYPE Type of feedback input for the axis; drive, local or remote.
COUNTERID Number of the feedback input for the axis.
When the internal (motor) feedback and the external (direct) feedback of an axis are at different drives,
set parameter PP5=-0,0001 at the drive that receives the external feedback.
i
COUNTERTYPE = Drive
COUNTERTYPE = Remote
COUNTERTYPE = Local
Motor
Feedback
Direct
Feedback
Sercos
DR
IV
E M
O
D
U
L
E
Motor
Feedback
Direct
Feedback
Sercos
D
R
IVE
M
O
DUL
E
DIGITAL INPUT
X1
X2
GND
I8
I1
N.C.
I2
I3
I4
I5
I6
I7
GND
I16
I9
N.C.
I10
I11
I12
I13
I14
I15
DIGITAL OUTPUT
X1
X2
GND
O8
O1
+24V
O2
O3
O4
O5
O6
O7
GND
O1 6
O9
+24V.
O1 0
O1 1
O1 2
O1 3
O1 4
O1 5
COUNTER
X1
X2
X3
X4
X5
GND
CAN L
S HIELD
S HIELD
CAN H
X3
GND
CAN L
S HIELD
S HIELD
CAN H
X2
POWER SUPPLY
4
0 1 F E
D C
B A 9 8
7 6 5 3 2
ADD MSB
LINE TERM
1 0
12
ADDRESS
RESET
P OW ER
SYSTEM READY
+5 ERROR
+5 OVER CURRENT
OVER VOLTAGE
+5V
X1
GND IN
CHASIS
GND IN
+24 V IN
S YS TEM
READY
CAN
Motor
Feedback
Direct
Feedback
Sercos
D
R
IVE
M
O
DU
L
E