Fagor CNC 8060, Руководство по установке, Страница: 292 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Machine parameters
for kinetics.
·292·
(R
EF
: 1709)
TDATA37
Rest position of the main rotary axis of the table.
Possible values: Within ±99999.9999º.
Default value: 0.
The rest position is the one where the direction vector of the rotary axes of the kinematics
have been defined. If the axis does not exist in the kinematics, it must be defined as
TDATA37=0.
TDATA38
Turning direction of the main rotary axis of the table.
Possible values: 0 (by the standard DIN 66217) / 1 (opposite to the standard DIN 66217).
Default value: 0.
The direction of the XYZ axes, according to the DIN 66217 standard is easy to remember
using the rule of the right hand. On rotary axes, the turning direction is established when
bending your fingers (closing your hand) around the associated linear axis while your thumb
is pointing in the positive direction of the linear axis.
TDATA39
Manual or servo-controlled main rotary axis of the table.
Possible values: 0 (servo-controlled) / 1 (manual).
Default value: 0.
This parameter indicates whether the rotary axis is manual or servo-controlled. If the axis
does not exist in the kinematics, it must be defined as TDATA39=1.
TDATA40
Origin for applying the RTCP.
Possible values: 0 (machine zero) / 1 (part zero).
Default value: 0.
This parameter indicates whether the CNC applies the RTCP referred to machine zero or
to part zero.
TDATA40=0 TDATA40=1
C=0º (machine coordinates) C=0º (machine coordinates)
C’=0º (part coordinates)
X
Y
C=0º
Y'
X'
X=X'
Y=Y'
C=0º
C'=0º