Fagor CNC 8060, Руководство по установке

Страница: 150 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Gene
ral
machin
e p
a
rameters. Execu
tio
n
chann
els.
·150·
(R
EF
: 1709)
2.4.19 Maximum acceleration and jerk on the tool path.
MAXACCEL
Maximum acceleration on the machining path.
Possible values: From 0.0010 to 600000000.0000 mm/min / from 0.00004 to 23622047.24409 inch/min.
Default value: There is no maximum feedrate.
Associated variable: (V.)[ch].MPG.MAXACCEL
This parameter may be used to smooth the feedrate on the tool path by limiting the maximum
acceleration on it. Regardless of the value of this parameter, the CNC always respects the
dynamics of the axes involved in the path; i.e. it respects the acceleration set for each axis.
How to change temporarily the maximum acceleration defined.
The variable "(V.)[ch].G.MAXACCEL" may be used to temporarily change at a particular time
and in real time the value set by the machine parameter. The CNC assumes the change
immediately and stays active until M30 or reset is executed, in which case the CNC restores
the value set by the machine parameter. If the variable takes the value of ·0·, the CNC does
not apply any acceleration limit on the tool path, not even the one set by machine parameter.
MAXJERK
Maximum jerk on the machining path.
Possible values: From 0.0010 to 6E11 mm/min / from 0.00004 to 2.362E10 inch/min.
Default value: There is no maximum feedrate.
Associated variable: (V.)[ch].MPG.MAXJERK
This parameter may be used to smooth the feedrate on the tool path by limiting the maximum
jerk on it. Regardless of the value of this parameter, the CNC always respects the dynamics
of the axes involved in the path; i.e. it respects the jerk set for each axis.
How to change temporarily the maximum jerk defined.
The variable "(V.)[ch].G.MAXJERK" may be used to temporarily change at a particular time
and in real time the value set by the machine parameter. The CNC assumes the change
immediately and stays active until M30 or reset is executed, in which case the CNC restores
the value set by the machine parameter. If the variable takes the value of ·0·, the CNC does
not apply any jerk limit on the tool path, not even the one set by machine parameter.
2.4.20 Maximum frequency on the tool path.
MAXFREQ
Maximum frequency generated on the machining path.
Possible values: From 0 to 500 Hz.
Default value: 0.
Associated variable: (V.)[ch].MPG.MAXFREQ
This parameter may be used to set the parameters the damping (smoothing) filter for
machining in G5. This filter improves the machining of CAD parts without having to activate
the HSC feature. This parameter must be set using the FineTune application.