Fagor CNC 8060, Руководство по установке

Страница: 458 / 698

Installation manual.
CNC 8060
CNC 8065
7.
TOOL
A
ND MA
GAZIN
E
MANAGEMEN
T.
Communica
tio
n
betwee
n
ma
nage
r
a
nd PLC.
·458·
(R
EF
: 1709)
7.3.3 Manager Emergency.
The manager may be set in an Emergency state when a malfunction occurs (the PLC has
executed the wrong action, incomplete tool change, etc.) or if the PLC activates the
emergency.
The PLC marks related to manager emergency are the following: There is one group of marks
for each magazine.
The following table shows the mnemonics for each mark (M) in each channel or magazine.
The meaning of the marks and registers is as follows.
Magazine ·1· Magazine ·2· Magazine ·3· Magazine ·4·
M SETTMEM
SETTMEMZ1
SETTMEMZ2 SETTMEMZ3 SETTMEMZ4
M RESTMEM
RESTMEMZ1
RESTMEMZ2 RESTMEMZ3 RESTMEMZ4
M TMINEM
TMINEMZ1
TMINEMZ2 TMINEMZ3 TMINEMZ4
Marks / Registers. Meaning,
SETTMEM The PLC sets this mark high (=1) to activate the tool manager
emergency.
RESTMEM The PLC sets this mark high (=1) to cancel the tool manager
emergency.
TMINEM The CNC sets this mark high (=1) to inform the PLC that an
emergency has occurred at the tool manager. To generate an
emergency at the manager from the PLC:
(1) Activate the emergency.
DFU (error condition) = SET SETTMEM
(2) Make sure that the emergency has occurred before canceling it.
TMINEM AND DFU (removal condition) = SET RESTMEM
The manager sets the SETMEM and RESTMEM signals low
(=0).