Fagor CNC 8060, Руководство по установке, Страница: 317 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
OEM machin
e parameters.
·317·
(R
EF
: 1709)
It must be borne in mind that reading and writing these variables interrupts block preparation
affecting program execution time. If the value of the parameter is not going to be changed
during execution, it is recommended to read the MTB variables at the beginning of the
program using arithmetic parameters (local or global) and use the global ones throughout
the program.
MODE
Mode for accessing the parameter from its variable.
Possible values: Read / Write.
Default value: Read.
The access to the parameters from the variables may be read-only or read-write. Both
reading and writing interrupt block preparation.
If a read-only access has been defined, the parameter cannot be modified from its variable.
If a write access has been defined, the parameter can be modified through its variable.
The value may always be written directly into the table, regardless of the value assigned to
this field.
INCHES
The parameter is affected by the change of units.
Possible values: Yes / No.
Default value: Yes.
This field indicates whether the value of the parameter is affected by the change of units,
mm or inches. For example, when the parameter represents a coordinate.
COMMENT
OEM parameter description.
This field offers the possibility to associate a short description with the parameter. This field
is for information only; it is not used by the CNC.
The comments are saved in the file MTBComments.txt and it is possible to have one file per
language. These files are saved in the folder C:\CNC8070 \MTB \data \Lang".