Fagor CNC 8060, Руководство по установке

Страница: 137 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
Gene
ral
machin
e p
a
rameters. Execu
tio
n
chann
els.
·137·
(R
EF
: 1709)
LCOMPTYP
Keep the longitudinal axis when changing planes
(G17/G18/G19).
Possible values: Yes / No.
Default value: No.
Associated variable: (V.)[ch].MPG.LCOMPTYPE
This parameter indicates which will be the longitudinal axis when changing planes
(G17/G18/G19). In either case, the longitudinal axis may be changed via part-program using
G20 functions or #TOOL AX.
PLANECANCEL
Assume IPLANE as active plane after M30/RESET or keep the
active one.
Possible values: Yes / No.
Default value: Yes.
Associated variable: (V.)[ch].MPG.PLANECANCEL
This parameter defines which is the active plane after executing M02, M30 or reset.
ICORNER
Type of corner (G5/G7/G50) by default.
Possible values: G50 / G5 / G7.
Default value: G50.
Associated variable: (V.)[ch].MPG.ICORNER
This parameter indicates the type of corner assumed by the CNC by default. There are three
types of corners, namely: square (G7), rounded (G5) and semi-rounded (G50). To change
the type of corner via part-program, use function G5, G7 or G50.
• When working in square corner, the CNC starts executing the next movement when the
axis gets into the in-position zone defined by parameter INPOSW.
• When working in round corner, it is possible to control the corner of the programmed
profile.
• When working in semi-rounded corner, the CNC starts executing the next movement
once the theoretical interpolation of the current move is completed.
If G5is selected, parameter ROUNTYPE must be set.
ROUNDTYPE
Rounding type in G5 (by default).
Possible values: Chordal error / % Feedrate.
Default value: Chordal error.
Associated variable: (V.)[ch].MPG.ROUNDTYPE
This parameter indicates the type of rounding applied by default when working in round
corner. To change the type of rounding via program, use the #ROUNDPAR instruction.
The rounding may be executed by limiting the chordal error or the feedrate. The chordal error
(#ROUNDPAR [1]) defines the maximum deviation allowed between the programmed point
and the resulting profile. The feedrate (#ROUNDPAR [2]) defines the percentage of the
active feedrate to be used for machining. Depending on the option selected, either parameter
MAXROUND or ROUNDFEED will have to be set.
LCOMPTYP Meaning.
Yes. When changing work planes (G17/G18/G19), the CNC el CNC keeps the
longitudinal axis that was active before the plane change.
No. When changing the work planes (G17/G18/G19), the CNC assumes the axis
perpendicular to the plane as the new longitudinal axis.
PLANECANCEL. Meaning.
Yes On power-up, after executing an M02 or M30, and after a reset, the CNC assumes
the plane defined in parameter IPLANE.
No On power-up, the CNC assumes the plane defined in parameter IPLANE; after
executing an M02 or M30, and after a reset, the CNC maintains the main active
plane.