Fagor CNC 8060, Руководство по установке

Страница: 426 / 698

Installation manual.
CNC 8060
CNC 8065
6.
LOGIC
CN
C INPUTS AN
D OUTPUTS.
Gene
ral mo
difia
b
le sign
als.
·426·
(R
EF
: 1709)
QWERTYOFF1
··
QWERTYOFF8
If the PLC turns one of these marks on, it disables the corresponding alphanumeric keyboard.
Each mark may be used to disable a USB keyboard (10K model) or one integrated into the
CAN bus (15" model) ; the rest of the elements of the bus are not affected. The keyboards
are not enabled or disabled immediately, especially when activating the USB keyboard, it
may take a few seconds.
The way the QWERTYOFF1 works depends on the CNC model.
• On the 10K model, this mark affects the alphanumeric keyboard and the softkeys of the
monitor (USB interface).
• On the 15" model, this mark affects the softkeys of the monitor (USB interface) and the
first node of the CAN bus. In order for the mark to affect the keyboard associated with
the central unit, the number of this keyboard must be the lowest one in the bus.
Marks QWERTYOFF2 to QWERTYOFF8 affect the rest of the CAN keyboards, depending
on the logic numbers of the nodes, from lowest to highest.
FLIMITAC
If the PLC activates this mark, the CNC activates the feedrate safety limits (parameter
FLIMIT) on all the axes of the system during the execution of the block. If the PLC deactivates
this mark, the CNC restores the programmed feedrate.
The feedrate safety limit is applied to the movements in automatic (G0, G1, etc.) and in jog
mode (jog, handwheels, etc.). This parameter affects neither the threading operations nor
the independent axis movements, which are executed at the programmed feedrate.
FLIMITACCH
There is a mark for each channel. The mnemonics for each channel are the following.
FLIMITACCHC1 (can also be programmed as FLIMITACCH)
FLIMITACCHC2 FLIMITACCHC3 FLIMITACCHC4
If the PLC activates this mark, the CNC activates the feedrate safety limits (parameter
FLIMIT) on all the axes of the channel during the execution of the block. If the PLC
deactivates this mark, the CNC restores the programmed feedrate.
The feedrate safety limit is applied to the movements in automatic (G0, G1, etc.) and in jog
mode (jog, handwheels, etc.). This parameter affects neither the threading operations nor
the independent axis movements, which are executed at the programmed feedrate.
SLIMITAC
If the PLC activates this mark, the CNC activates the speed safety limits (parameter SLIMIT)
on all the spindles of the system during the execution of the current block. If the PLC
deactivates this mark, the CNC restores the programmed speed.
PT100OFF1
··
PT100OFF20
The PT100 inputs are activated via the machine parameters. The PLC has the following
marks in order to be able to temporarily disable the sensor (for example, during a spindle
change).
If the PLC activates one of these marks, the CNC disables the corresponding sensor
(parameter PT100 n). The PT100OFF1 mark corresponds to the input 1 sensor, PT100OFF2
is for the input 2 sensor and so forth.