Fagor CNC 8060, Руководство по установке

Страница: 245 / 698

Installation manual.
CNC 8060
CNC 8065
MACHINE PA
RAMETERS.
2.
M
a
chine parameters for
JOG
m
o
de.
·245·
(R
EF
: 1709)
The JOG keypad may consist of the following types of keys. Both types of keys may be
defined at the same JOG keypad. To define the behavior of each key, assign to them one
of the following values.
JOGTYPE
Behavior of the jog keys.
Possible values: Pressed axis / Maintained axis.
Default value: Pressed axis.
Associated variable: (V.)MPMAN.JOGTYPE
This parameter is applied when the jog keyboard has different keys for selecting the axis
and the jogging direction. In this case, jogging an axis requires activating both the axis key
and the moving direction.
There are two options, depending on how the jog keyboard has been configured.
• With the "pressed axis" option, the axis will move while both keys are pressed, the axis
key and the direction key.
• With the "maintained axis" option, pressing the axis key will select it. The axis will move
while the direction key is kept pressed. To de-select the axis, press [ESC] or [STOP].
Keys. Meaning.
Keys to define the axis and the jogging direction.
The parameter is set with a value between -1 and +16 (signed). The sign indicates
the positive direction (+) or the negative direction (-) and the number corresponds to
the logic axis, according to parameter AXISNAME.
Keys to define the axis to be jogged.
The parameter is set with a value between 1 and 16 (unsigned) that corresponds to
the logic axis according to parameter AXISNAME.
Keys to define the direction of the movement.
The parameter is set with one of the "+" and "-" values to indicate the moving direction.
Rapid key.
The parameter is set with the "R" value.
X+ 7+
X 7
+ -