Fagor CNC 8060 Скачать руководство пользователя страница 305 | Manualshive

Страница: 305 / 698

Fagor CNC 8060 Скачать руководство пользователя страница 305

Installation manual.

CNC 8060
CNC 8065

MACHINE PA

RAMETERS.

2.

Machin

e parameters fo

r

HMI (Interface).

·305·

(R

EF

: 1709)

2.11

Machine parameters for HMI (Interface).

These parameters are used to define the communication environment (interface) between
the operator and the CNC. To validate the changes made to these parameters, the CNC must
be reset.

2.11.1

Main window dimensions and resolution.

WINDOW
Main window dimensions and resolution.

This parameter shows the data to configure the main window. The table has the following
machine parameters.

POSX
X coordinate of the top left corner.

Default value: 0.
Parameter included in the WINDOW table.

Consult the machine parameter of HMI POSY.

POSY
Y coordinate of the top left corner.

Default value: 0.
Parameter included in the WINDOW table.

These parameters define the X and Y coordinate to position the upper left corner of the
interface. The interface can be moved by clicking with the mouse on the icon showing the
program status of the active channel. Double click on this icon and the interface is positioned
in the upper left corner (POSX=0 POSY=0).

RESOLUTION
Screen resolution.

Possible values: CUSTOM / 10" / 15" / 19" / 21" LANDSCAPE / 21" PORTRAIT.
Default value: 10".
Parameter included in the WINDOW table.

Screen resolution. The CUSTOM option enables the width (WIDTH parameter) and the
height (HEIGHT parameter) of the window to be customized. The predefined sizes are set
to the following resolutions.

WINDOW

POSX

X coordinate of the top left corner.

POSY

Y coordinate of the top left corner.

RESOLUTION

Window resolution.

WIDTH

Width of the window.

HEIGHT

Height of the window.

RESOLUTION.
(value)

Interface size (pixels).

CUSTOM

This option enables the width (WIDTH parameter) and the height
(HEIGHT parameter) of the screen to be customized.

10"

800 × 600.

15"

1024 × 768.

«
...
303
304
305
306
307
...
»

Содержание CNC 8060



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов