Fagor CNC 8060, Руководство по установке, Страница: 452 / 698

Installation manual.
CNC 8060
CNC 8065
7.
TOOL
A
ND MA
GAZIN
E
MANAGEMEN
T.
Type
s of to
ol magazi
ne.
·452·
(R
EF
: 1709)
"Random" or "Non-Random" magazine.
Depending on how the tools are stored in the magazine during a tool change, the magazine
may be either random or non-random. In a random magazine, the tool may occupy any
position whereas in a non-random magazine, the tools must always occupy the same
position.
In any case and even when all the magazines are random, the tools are always stored in
the same magazine from which they were picked up.
"Cyclic" or "Non-Cyclic" magazine.
A cyclic magazine requires a tool change command M06 after searching a tool and before
searching the next one. In a non-cyclic magazine, it is possible to perform several
consecutive tool searches without necessarily having to change the tool.