Fagor CNC 8060, Руководство по установке

Страница: 56 / 698

Installation manual.
CNC 8060
CNC 8065
1.
SOFTWARE INSTALLATION.
Softwa
re co
nfigu
ra
ti
on.
·56·
(R
EF
: 1709)
1.6.1 MTB (Machine Tool Builder) folder.
This folder is especially directed at machine manufacturers. This folder contains the
modifications made by the OEM at the CNC like, for example, the PLC program, machine
parameters, new screens, integrating external applications, etc.
Folder. Contents.
DATA This folder contains the following files or subfolders.
• The databases for machine parameters, tables, etc. and the safety
backup (in ASCII) of those tables.
• The files related to the data of the editor cycles (dat files).
• The data the CNC must maintain after it has been turned off (coordinates,
zero offsets, etc.).
• Each language of the ..\LANG\ subfolder contains the file cncError.txt
that contains the OEM messages and errors in different languages. If an
error text is not in the folder of the language active at the CNC, it looks
for it in ..\LANG\ENGLISH\cncError.txt; if it is not there, the CNC will issue
the relevant error message.
DRIVE This folder contains the information regarding the DDSSETUP mode.
GRAFDATA This folder contains the information regarding graphics.
KINEMATIC This folder contains the information regarding the OEM kinematics.
MMC This folder contains the CNC custom setting made by the machine builder.
• The "...\CONFIG" subfolder contains the configuration files (ini files) and
the files that may be modified using the screen customizing tool (Fguim).
• The ..\IMAGES subfolder contains the images, icons, videos, etc. that
the OEM uses to customize the CNC.
• Each language of the ..\LANG subfolder contains the texts used by the
scripts. Each language of the ..\LANG subfolder contains the file with the
texts for the language active at the CNC. When changing the CNC
language, the CNC replaces this file with the one corresponding
language.
PLC This folder contains the information regarding the PLC.
• Each language of the ..\LANG\ subfolder contains the messages and
errors of the PLC in different languages.
• The ..\PROJECT subfolder contains the files that make up the PLC
project and the object file.
• The ..\WATCH contains the data saved from the monitoring and logic
analyzer services.
RELEASE This folder contains the components (ocx files) used by the OEM to create
his own application.
SUB This folder contains the following files or subfolders.
• The OEM subroutines (tool change, home search, etc.).
• Each language of the ..\HELP folder contains the help files associated
with OEM subroutines and the pcall.txt file that contains the list of OEM
subroutines. If these files are not in the folder of the language active at
the CNC, the editor will not provide them as help.
TUNING This folder contains the information regarding the setup assistance.