Fagor CNC 8060, Руководство по установке

Страница: 12 / 698

Installation manual.
CNC 8060
CNC 8065
·12·
(R
EF
: 1709)
SOFTWARE OPTIONS.
Some of the features described in this manual are dependent on the acquired software options. The active
software options for the CNC can be consulted in the diagnostics mode (accessible from the task window
by pressing [CTRL] [A]), under software options.
Consult the ordering handbook for information on the software options available for your model.
SOFT 8060 ADDIT AXES
Additional shaft.
Add axes to the default configuration.
SOFT 8060 ADDIT SPINDLES
Additional spindle.
Add spindles to the default configuration.
SOFT 8060 ADDIT TOOL MAGAZ
Additional tool magazine.
Add tool magazines to the default configuration.
SOFT 8060 ADDIT CHANNELS
Additional channel.
Add channels to the default configuration.
SOFT DIGITAL SERCOS
Sercos digital bus.
Sercos digital bus.
SOFT EDIT/SIMUL
EDISIMU mode (editing and simulation).
It allows for the editing, modification and simulation of a
part-program.
SOFT TOOL RADIUS COMP
Compensación de radio.
Tool compensation allows programming the contour to be
machined based on part dimensions of the and without
taking into account the dimensions of the tool that will be
used later on. This avoids having to calculate and define
the tool path based on the tool radius.
SOFT PROFILE EDITOR
Profile editor.
Allows for the part profiles to be edited graphically and to
import dxf files.
SOFT 60 F3D GRAPHICS
F3D graphics.
High definition solid 3D graphics for the execution and
simulation of part-programs and canned cycles of the
editor.
During machining, the F3D graphics display the tool
removing the material from the part in real time, allowing
for the condition of the part to be seen at all times. F3D
graphics can display up to 4 views of the part, where each
can be rotated, zoomed in or zoomed out. Measurements
can also be made on the part and even sections on the
piece from any angle.
SOFT 60 IIP CONVERSATIONAL
Interactive Icon-based Pages (conversational mode).
IIP or conversational mode is specifically designed for
people without any prior programming knowledge or for
those that are not familiarized with Fagor CNC's.
Working in conversational mode is easier than in ISO
mode, as it ensures proper data entry and minimizes the
number of operations to be defined. There is no need to
work with part-programs.
SOFT 60 RTCP
Dynamic RTCP (Rotating Tool Center Point).
The dynamic RTCP option is required for interpolation
machining with 4, 5 or 6 axis.