Fagor CNC 8060, Руководство по установке

Страница: 66 / 698

Installation manual.
CNC 8060
CNC 8065
2.
MACHINE PA
RAMETERS.
Gen
e
ral machin
e parameters.
·66·
(R
EF
: 1709)
2.3.2 Configuring the axes of the system.
NAXIS
Number of axes governed by the CNC.
Possible values: From 1 to 32.
Default value: 3.
Associated variable: (V.)MPG.NAXIS
This parameter sets the number of axes of the system, whether they are servo-controlled
or not. The maximum number of axes depends on the number of spindles, the sum of axes
plus spindles being 32 at the most. For instance, a system without spindles can have up to
32 axes (NSPDL=0 NAXIS=32) and a system with 6 spindles can have up to 26 axes
(NSPDL=6 NAXIS=26).
Bear in mind that the number of axes does not depend on the number of channels. A channel
may have one, several or no axes associated with it.
AXISNAME
List of system axes.
This parameter shows the table to define the names of the axes. Parameter NAXIS sets the
number of axes of the system.
AXISNAME n
Name of the axes.
Possible values: X, X1··X9, ·· , C, C1··C9.
Default value: Starting from AXISNAME1; X, Y, Z...
Associated variable: (V.)MPG.AXISNAMEn
Parameter included in the AXISNAME table.
The axis name is defined by 1 or 2 characters. The first character must be one of the letters
X - Y - Z - U - V - W - A - B - C. The second character is optional and will be a numerical
suffix between 1 and 9. This way, the name of the axes may be within the range X,
X1…X9,...C, C1…C9. For example X, X1, Y3, Z9, W, W7, C...
When defining the axes, bear in mind that the order in which they are defined determines
their logic number. The first axis of the table will be logic axis -1- and so on. As with the axis
name, the logic number permits identifying the axis in PLC variables, marks, etc.
AXISNAME
AXISNAME n Name of the axes.
AXISNAME n Logic order.
AXISNAME 1 Logic number ·1·.
AXISNAME 2 Logic number ·2·.
AXISNAME 3 Logic number ·3·.