background image

OPERATING

INSTRUCTIONS

Manual Grill Tool Sharpener

Model No. 164-A

355 East Kehoe Blvd. 

l

 Carol Stream, IL  60188

Tel: (630) 462-8800 

l

 Fax:  (630) 462-1460

Toll Free:  1-800-PCASTLE

Printed in September 1997

Prince Castle Inc.

164-504

SPECIFICATION

164-A

Dimensions

Length

17” (43.18 cm)

Width

8” (20.32 cm)

Height

7” (17.78 cm)

Shipping Weight

22lbs. (10 kg.)

The Prince Castle manual grill tool sharpener gives a

quick sharpened straight edge to scrapers and

spatulas.  Sharp spatulas pick up grilled meat

cleanly without tearing the seared surface.  Natural

juices are kept in food for more flavor, and a more

appetizing appearance.  With precision edges

cleanup is quick and easy without scratching. Plus,

compact size of the manual grill tool sharpener

saves valuable counter space.

 LIMITED  WARRANTY

This product is warranted to be free from defects in

material and/or workmanship for a period of one

year from date of original installation, not to exceed

18 months from date of shipment from our factory.
Any component which proves to be faulty in material

and/or workmanship will be replaced or repaired (at

the option of Prince Castle, Inc.) without cost to the

customer for parts or labor.
This warranty is subject to the following exceptions/

conditions:

l

Use  of  any  non-genuine  Prince  Castle  parts

voids this warranty.  All genuine Prince Castle

replacement spare parts are warranted for ninety

(90) days from date of purchase.

l

Damage caused by carelessness, neglect, and/

or abuse (e.g., dropping, tampering or altering

parts), equipment damaged in shipment, by fire,

flood or an act of God is not covered under this

warranty.

l

This  unit  is  portable,  charges  for  on  location

service (i.e. trip charges, mileage) are not in-

cluded in the provisions of the warranty.

TABLE OF CONTENTS

PAGE

Installation ..................................................................... 2
Operating ....................................................................... 2
Parts List ....................................................................... 3
Troubleshooting ............................................................ 4
Non-scheduled Maintenance ....................................... 4

Содержание 164-a

Страница 1: ... defects in material and or workmanship for a period of one year from date of original installation not to exceed 18 months from date of shipment from our factory Any component which proves to be faulty in material and or workmanship will be replaced or repaired at the option of Prince Castle Inc without cost to the customer for parts or labor This warranty is subject to the following exceptions c...

Страница 2: ... meat spatula or grill scraper blade squarely against gauge stop bar item D in figure 1 IMPORTANT Center spatula in carriage 10 Tighten jaws by turning carriage knob item C in figure 1 clockwise while holding carriage in the up position 11 Lift gauge bar item D in figure 1 upward over detent pin located on the side of the carriage This pin holds the gauge bar up 12 Lower carriage assembly item B i...

Страница 3: ...9 305 Basic External Retaining Ring 1 9 164 58S Knob 2 0 76 384 Set Screw 2 1 68 003 Roll Pin 2 2 89 582 Spring Plunger 2 3 164 38 Gauge Stop 2 4 164 43 Spacer EXPLODED VIEW ITEM PART NO DESCRIPTION 2 5 578 282S Scraper Holder Assembly optional 2 6 578 259 Scraper Holder 2 7 152 45 Handle A 76 509 Screw Hex Head Cap 68 16 X 7 8 79 077 Washer Flat 3 8 I D B 76 311 Screw Hex Head 1 4 20 X 1 79 032 W...

Страница 4: ... above This guide will assist in determining the cause of any malfunction to insure maintenance is required To change file or change to new position on existing file A Remove 2 screws See item A in figure 3 B Turn file 180 degrees C Tighten screws D To use other positions of file reverse file clamps See item B in figure 3 figure 3 A B A B PROBLEM Tool edge not Tool not lined up properly in carriag...

Отзывы: