The current status of the server. This field takes one of the following values:
Disabled:
The server is disabled.
Not Ready:
The server is enabled, but IP communication is not yet up and running.
Ready:
The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead (X seconds left):
Access attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will get re-
enabled when the dead-time expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable when more than one server is
enabled.
Accounting Port :
UDP port number for accounting.
Accounting Status :
The current status of the server. This field takes one of the following values:
Disabled:
The server is disabled.
Not Ready:
The server is enabled, but IP communication is not yet up and running.
Ready:
The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead (X seconds left):
Access attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will get re-
enabled when the dead-time expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable when more than one server is
enabled.
Buttons
Figure 11-6.2: The RADIUS Server Status Buttons
Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every
3
seconds.
Refresh :
Click to refresh the page immediately.
If you select Server#1 to display RADIUS Statistics
Содержание Cross-8/HPoE-10G
