Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 201 / 321

Figure 11-1.3: The Authentication Method Configuration
Parameter description:
Authentication Method Configuration

Client :
The management client for which the configuration below applies.

Method :
Authentication Method can be set to one of the following values:

none : authentication is disabled and login is not possible.

local : use the local user database on the switch for authentication.

radius : use a remote RADIUS server for authentication.

tacacs : use a remote TACACS server for authentication.
Methods that involves remote servers are timed out if the remote servers are offline. In this
case the next method is tried. Each method is tried from left to right and continues until a
method either approves or rejects a user. If a remote server is used for primary
authentication it is recommended to configure secondary authentication as 'local'. This will
enable the management client to login via the local user database if none of the configured
authentication servers are alive.

Service Port :
The TCP port for each client service. The valid port number is 1 ~ 65534.

HTTP Redirect :
Enable http Automatic Redirect.
Command Authorization Method Configuration

Client :
The management client for which the configuration below applies.

Method :
Authorization Method can be set to one of the following values: