2.
Click Refresh for manual update web screen.
3.
Click Auto-refresh for auto-update web screen.
Figure 2-4.5: The LLDP Neighbour PoE information
Parameter description
Local Port :
The interface for this switch on which the
Power Type :
The Power Type represents whether the device is a Power Sourcing Entity (PSE) or Power
Device (
).
If the Power Type is unknown it is represented as "Reserved".
Power Source :
The Power Source represents the power source being utilized by a PSE or
If the device is a PSE device it can either run on its Primary Power Source or its Backup
Power Source. If it is unknown whether the PSE device is using its Primary Power Source or
its Backup Power Source it is indicated as "Unknown"
If the device is a
device it can either run on its local power supply or it can use the PSE
as power source. It can also use both its local power supply and the PSE.
If it is unknown what power supply the
device is using it is indicated as "Unknown"
Power Priority :
Power Power Priority represents the priority of the
associated with the PSE type device's interface that is sourcing the power. There are three
levels of power priority. The three levels are: Critical, High and Low.
If the power priority is unknown it is indicated as "Unknown"
Maximum Power :
The Maximum Power Value contains a numerical value that indicates the maximum power
in watts required by a
device from a PSE device, or the minimum power a PSE device is
capable of sourcing over a maximum length cable based on its current configuration.
The maximum allowed value is 102.3 W. If the device indicates value higher than 102.3 W, it
is represented as "reserved"
Buttons
Figure 2-4.5: The LLDP Neighbor PoE buttons
Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every
3
seconds.
Refresh :
Содержание Cross-8/HPoE-10G
