Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 292 / 321

Indicates the trap destination mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.

Version :
Indicates the SNMP trap supported version. Possible versions are:
SNMPv1: Set SNMP trap supported version 1.
SNMPv2c: Set SNMP trap supported version 2c.
SNMPv3: Set SNMP trap supported version 3.

Destination Address :
Indicates the SNMP trap destination address. It allow a valid IP address in dotted decimal
notation ('x.y.z.w').
And it also allow a valid hostname. A valid hostname is a string drawn from the alphabet
(A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first character must be an
alpha character, and the first and last characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit records
represented as eight fields of up to four hexadecimal digits with a colon separating each
field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be
used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can appear only once. It can also represent a legally valid IPv4 address. For example,
'::192.1.2.34'.

Destination port :
Indicates the SNMP trap destination port. SNMP Agent will send SNMP message via this
port, the port range is 1~65535.
SNMP Trap Configuration

Trap Config Name :
Indicates which trap Configuration's name for configuring. The allowed string length is 1
to 32, and the allowed content is ASCII characters from 33 to 126.

Trap Mode :
Indicates the SNMP mode operation. Possible modes are:
on: Enable SNMP mode operation.
off: Disable SNMP mode operation.

Trap Version :
Indicates the SNMP supported version. Possible versions are:
SNMP v1: Set SNMP supported version 1.
SNMP v2c: Set SNMP supported version 2c.
SNMP v3: Set SNMP supported version 3.

Trap Community :
Indicates the community access string when sending SNMP trap packet. The allowed string
length is 0 to 63, and the allowed content is ASCII characters from 33 to 126.

Trap Destination Address :
Indicates the SNMP trap destination address. It allow a valid IP address in dotted decimal
notation ('x.y.z.w').
And it also allow a valid hostname. A valid hostname is a string drawn from the alphabet
(A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first character must be an
alpha character, and the first and last characters must not be a dot or a dash.
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit records