Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 67 / 321

The timeout mode configured for the port (Fast or Slow).

Aggregation :
Show whether the system considers this link to be "aggregateable"; i.e., a potential
candidate for aggregation.

Synchronization :
Show whether the system considers this link to be "IN_SYNC"; i.e., it has been allocated to
the correct LAG, the group has been associated with a compatible Aggregator, and the
identity of the LAG is consistent with the System ID and operational Key information
transmitted.

Collecting :
Show if collection of incoming frames on this link is enabled.

Distributing :
Show if distribution of outgoing frames on this link is enabled.

Defaulted :
Show if the Actor's Receive machine is using Defaulted operational Partner information.

Expired :
Show if that the Actor's Receive machine is in the EXPIRED state.
Buttons
Figure 3-5.5: The LACP Neighbor Port Status buttons

Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

Refresh :
Click to refresh the page.
3-5.6 Port Status
This section describes that when you complete to set LACP function on the switch then it
provides a Port Status overview for all LACP instances
Web Interface
To display the LACP Port status in the web interface:
Click Port Management, Link Aggregation
and Port Status.
If you want to auto-refresh the information then you need to evoke the “Auto-refresh”.
1.
Click
“Refresh” to refresh the LACP Port Status.