![Evidence Cross-8/HPoE-10G Скачать руководство пользователя страница 52](http://html1.mh-extra.com/html/evidence/cross-8-hpoe-10g/cross-8-hpoe-10g_user-manual_2445999052.webp)
Figure 3-1: The Port Configuration
Parameter description:
Port :
This is the logical port number for this row.
Description :
Enter up to 63 characters to be descriptive name for identifies this port.
Link :
The current link state is displayed graphically. Green indicates the link is up and red that it is
down.
Current Link Speed Status:
Provides the current link speed of the port.
Configured Link Speed :
Selects any available link speed for the given switch port. Only speeds supported by the
specific
port
is
shown.
Possible
speeds
are:
Disabled -
Disables
the
switch
port
operation.
Auto - Port auto negotiating speed with the link partner and selects the highest speed that
is
compatible
with
the
link
partner.
10Mbps HDX - Forces the cu port in 10Mbps half duplex mode.
10Mbps FDX - Forces the cu port in 10Mbps full duplex mode.
100Mbps HDX - Forces the cu port in 100Mbps half duplex mode.
100Mbps FDX - Forces the cu port in 100Mbps full duplex mode.
1Gbps FDX - Forces the port in 1Gbps full duplexFlow Control :
When Auto Speed is selected on a port, this section indicates the flow control capability
that is advertised to the link partner. When a fixed-speed setting is selected, that is what is
used. The Current Rx column indicates whether pause frames on the port are obeyed, and
the Current Tx column indicates whether pause frames on the port are transmitted. The Rx
and Tx settings are determined by the result of the last
Check the configured column to use flow control. This setting is related to the setting for
Configured Link Speed.
Maximum Frame Size
Enter the maximum frame size allowed for the switch port, including FCS. The range
is 1518-10240 bytes.
Buttons
Refresh :
Содержание Cross-8/HPoE-10G
