Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 304 / 321

Figure 18-2: The Traceroute
Parameter description:

IP Address :
The destination IP Address.

Wait Time :
Set the time (in seconds) to wait for a response to a probe (default 5.0 sec). Values range
from 1 to 60. The payload size of the ICMP packet. Values range from 2 bytes to 1452 bytes.

Max TTL :
Specifies the maximum number of hops (max time-to-live value) traceroute will probe.
Values range from 1 to 255. The default is 30.

Probe Count :
Sets the number of probe packets per hop. Values range from 1 to 10. The default is 3.
Buttons

Start :
Click the “Start” button to start to traceroute the target IP Address.

New Ping :
Back to Traceroute page.
18-3 Cable Diagnostics
This section shows how to run Cable Diagnostics for copper ports.
Web Interface
To configure a Cable Diagnostics Configuration in the web interface:
1. Click Diagnostics and Cable Diagnostics.
2. Specify Port which want to check.
3. Click Start.