Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 289 / 321

16-2 Status
This page allows the user to inspect the current PTP clock settings.
Web Interface
To display the PTP status in the web interface:
1.
Click PTP and Status.
2. Specify the PTP parameters.
3. Click Apply to apply the change.
Figure 16-2: The PTP Status
Parameter description:
PTP External Clock Description

One_PPS_Mode :
Shows the current One_pps_mode configured.
Output : Enable the 1 pps clock output
Input : Enable the 1 pps clock input
Disable : Disable the 1 pps clock in/out-put

External Enable :
Shows the current External clock output configuration.
True : Enable the external clock output
False : Disable the external clock output

Adjust Method :
Shows the current Frequency adjustment configuration.
LTC : Use Local Time Counter (LTC) frequency control
Single : Use SyncE DPLL frequency control, if allowed by SyncE
Independent : Use an oscillator independent of SyncE for frequency control, if supported by
the HW
Common : Use second DPLL for PTP, Both DPLL have the same (SyncE recovered) clock.