Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 288 / 321

1. True : Enable the external clock output
2. False : Disable the external clock output

Adjust Method :
This Selection box will allow you to configure the Frequency adjustment configuration.
1. LTC : Select Local Time Counter (LTC) frequency control
2. Single : Select SyncE DPLL frequency control, if allowed by SyncE
3. Independent : Select an oscillator independent of SyncE for frequency control, if
supported by the HW
4. Common : Select second DPLL for PTP, Both DPLL have the same (SyncE recovered) clock.
4. Auto : AUTO Select clock control, based on PTP profile and available HW resources.

Clock Frequency :
This will allow to set the Clock Frequency.
The possible range of values are 1 - 25000000 (1 - 25MHz)
PTP Clock Configuration

Delete :
Check this box and click on 'Save' to delete the clock instance.

Clock Instance :
Indicates the instance number of a particular Clock Instance [0..3].
Click on the Clock Instance number to edit the Clock details.

HW Domain :
Indicates the HW clock domain used by the clock.

Device Type :
Indicates the Type of the Clock Instance. There are five Device Types.
1. Ord-Bound - clock's Device Type is Ordinary-Boundary Clock.
2. P2p Transp - clock's Device Type is Peer to Peer Transparent Clock.
3. E2e Transp - clock's Device Type is End to End Transparent Clock.
4. Master Only - clock's Device Type is Master Only.
5. Slave Only - clock's Device Type is Slave Only.

Profile :
Indicates the profile used by the clock.
Buttons

Add New Entry :
Click to add a new clock instance.

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.