Counter :
The counter indicates the number of times the ACE was hit by a frame.
Modification Buttons :
You can modify each ACE (Access Control Entry) in the table using the following buttons:
:
Inserts
a
new
ACE
before
the
current
row.
:
Edits
the
ACE
row.
:
Moves
the
ACE
up
the
list.
:
Moves
the
ACE
down
the
list.
:
Deletes
the
ACE.
: The lowest plus sign adds a new entry at the bottom of the ACE listings.
ACE Configuration
An ACE consists of several parameters. These parameters vary according to the frame type
that you select. First select the ingress port for the ACE, and then select the frame type.
Different parameter options are displayed depending on the frame type selected.
A frame that hits this ACE matches the configuration that is defined here.
Ingress Port :
Select the ingress port for which this ACE applies.
All:
The
ACE
applies
to
all
port.
Port n: The ACE applies to this port number, where n is the number of the switch port.
Policy Filter :
Specify
the
policy
number
filter
for
this
ACE.
Any:
No policy filter is specified. (policy filter status is "don't-care".)
Specific:
If you want to filter a specific policy with this ACE, choose this value. Two field for
entering an policy value and bitmask appears.
Policy Value :
When "Specific" is selected for the policy filter, you can enter a specific policy value. The
allowed range is 0 to 255.
Policy Bitmask :
When "Specific" is selected for the policy filter, you can enter a specific policy bitmask. The
allowed range is 0x0 to 0xff. Notice the usage of bitmask, if the binary bit value is "0", it
means this bit is "don't-care". The real matched pattern is [policy_value & policy_bitmask].
For example, if the policy value is 3 and the policy bitmask is 0x10(bit 0 is "don't-care" bit),
then policy 2 and 3 are applied to this rule.
Frame Type :
Select the frame type for this ACE. These frame types are mutually exclusive.
Any: Any frame can match this ACE.
Ethernet Type: Only Ethernet Type frames can match this ACE. The IEEE 802.3 describes the
value of Length/Type Field specifications to be greater than or equal to 1536 decimal
(equal to 0600 hexadecimal).
ARP: Only ARP frames can match this ACE. Notice the ARP frames won't match the ACE
with ethernet type.
IPv4: Only IPv4 frames can match this ACE. Notice the IPv4 frames won't match the ACE
with ethernet type.
IPv6: Only IPv6 frames can match this ACE. Notice the IPv6 frames won't match the ACE
with Ethernet type.
Action :
Содержание Cross-8/HPoE-10G
