Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 68 / 321

Figure 3-5.6: The LACP Status
Parameter description:

Port :
The switch port number.

LACP :
'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP is not
enabled or that the port link is down. 'Backup' means that the port could not join the
aggregation group but will join if other port leaves. Meanwhile it's LACP status is disabled.

Key :
The key assigned to this port. Only ports with the same key can aggregate together.

Aggr ID :
The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are GLAGs while IDs 3-
14 are LLAGs.

Partner System ID :
The partner's System ID (MAC address).

Partner Port :
The partner's port number connected to this port.

Partner Prio:
The partner's port priority.
Buttons
Figure 3-5.4: The Port Status buttons

Auto-refresh :
Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

Refresh :
Click to refresh the page.
3-6 Loop Protection
3-6.1 Configuration
The loop Protection is used to detect the presence of traffic. When switch receives packet’s
(looping detection frame) MAC address the same as oneself from port, show Loop Protection
happens. The port will be locked when it received the looping Protection frames. If you want
to resume the locked port, please find out the looping path and take off the looping path,
then select the resume the locked port and click on “Resume” to turn on the locked ports.