Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 285 / 321

Chapter 15 ERPS
The ERPS instances are configured here.
Web Interface
To configure the Ethernet Ring Protection Switching parameters in the web interface:
1.
Click ERPS.
2. Specify the Ethernet Ring Protection Switching parameters.
3. Click Apply to apply the change.
Figure 15: The Ethernet Ring Protection Switching
Parameter description:

Delete :
This box is used to mark an EPS for deletion in next save operation.

ERPS ID :
The ID of the created Protection group, It must be an integer value between 1 and 64. The
maximum number of ERPS Protection Groups that can be created are 64. Click on the ID of
an Protection group to enter the configuration page.

Port 0 :
This will create a Port 0 of the switch in the ring.

Port 1 :
This will create "Port 1" of the switch in the Ring. As interconnected sub-ring will have only
one ring port, "Port 1" is configured as "0" for interconnected sub-ring. "0" in this field
indicates that no "Port 1" is associated with this instance

Port 0 SF MEP :
The Port 0 Signal Fail reporting MEP.

Port 1 SF MEP :
The Port 1 Signal Fail reporting MEP. As only one SF MEP is associated with interconnected
sub-ring without virtual channel, it is configured as "0" for such ring instances. "0" in this
field indicates that no Port 1 SF MEP is associated with this instance.

Port 0 APS MEP :
The Port 0 APS PDU handling MEP.

Port 1 APS MEP :