Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 72 / 321

Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

Refresh :
Click to refresh the page immediately.
3-7 UDLD
3-7.1 UDLD Configuration
This page allows the user to inspect the current UDLD configurations, and possibly change
them as well.
Web Interface
To configure the UDLD parameters in the web interface:
1.
Click Port Management, UDLD and UDLD Configuration.
2. Evoke to select enable or disable the port UDLD.
3. Specify the Message Interval.
4. Click the apply to save the setting.
5. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
Figure 3-7.1: The UDLD Configuration
Parameter description :

Port :
Port number of the switch.

UDLD Mode :
Configures the UDLD mode on a port. Valid values are Disable, Normal and Aggressive.
Default mode is Disable.
Disable : In disabled mode, UDLD functionality doesn't exists on port.
Normal: In normal mode, if the link state of the port was determined to be unidirectional,
it will not affect the port state.
Aggressive : In aggressive mode, unidirectional detected ports will get shutdown. To bring
back the ports up, need to disable UDLD on that port.

Message Interval :
Configures the period of time between UDLD probe messages on ports that are in the
advertisement phase and are determined to be bidirectional. The range is from 7 to 90