Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 105 / 321

5-8 Private VLAN
The Private VLAN membership configurations for the switch can be monitored and modified
here. Private VLAN s can be added or deleted here. Port members of each Private VLAN can
be added or removed here.
Private VLANs are based on the source port mask, and there are no connections to VLANs.
This means that VLAN ID s and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets.
By default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member of
multiple Private VLANs.
VLAN Priority : Voice VLAN > MAC based VLAN > Protocol based VLAN > Tag based VLAN
Web Interface
To configure Port Isolation configuration in the web interface:
1. Click VLAN Management and Private VLAN.
2. Configure the
Private VLAN membership configurations for the switch.
3. Click Apply.
Figure 5-8: The Private VLAN Configuration
Parameter description:

Delete :
To delete a private VLAN entry, check this box. The entry will be deleted during the next
apply.

Private VLAN ID :
Indicates the ID of this particular private VLAN.

Port Members :
A row of check boxes for each port is displayed for each private VLAN ID. To include a port
in a Private VLAN, check the box. To remove or exclude the port from the Private VLAN,
make sure the box is unchecked. By default, no ports are members, and all boxes are
unchecked.

Add New Private VLAN :
Click to add a new private VLAN ID. An empty row is added to the table, and the private
VLAN can be configured as needed. The allowed range for a private VLAN ID is the same as
the switch port number range. Any values outside this range are not accepted, and a
warning message appears. Click "OK" to discard the incorrect entry, or click "Cancel" to
return to the editing and make a correction.