Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 152 / 321

removal is also called aging.
Configure aging time by entering a value here in seconds; for example, Age time seconds.
The allowed range is 10 to 1000000 seconds.
Disable the automatic aging of dynamic entries by checking Disable automatic aging.
MAC Table Learning :
If the learning mode for a given port is greyed out, another module is in control of the
mode, so that it cannot be changed by the user. An example of such a module is the MAC-
Based Authentication under 802.1X. Each port can do learning based upon the following
settings:

Auto :
Learning is done automatically as soon as a frame with unknown SMAC is received.

Disable :
No learning is done.

Secure :
Only static MAC entries are learned, all other frames are dropped.
N
OTE
: Make sure that the link used for managing the switch is
added to the Static Mac Table before changing to secure learning
mode, otherwise the management link is lost and can only be
restored by using another non-secure port or by connecting to the
switch via the serial interface.
VLAN Learning Configuration

Learning-disabled VLANS :
This field shows the Learning-disabled VLANs. When a NEW MAC arrives into a learning-
disabled VLAN, the MAC won't be learnt. By the default, the field is empty. More VLANs
may be created by using a list syntax where the individual elements are separated by
commas. Ranges are specified with a dash separating the lower and upper bound. The
following example will create VLANs 1, 10, 11, 12, 13, 200, and 300: 1,10-13,200,300. Spaces
are allowed in between the delimiters.
Static MAC Table Configuration
The static entries in the MAC table are shown in this table. The static MAC table can contain
128 entries. The maximum of 128 entries is for the whole stack, and not per switch.

VLAN ID :
The VLAN ID of the entry.

MAC Address :
The MAC address of the entry.

Port Members :
Checkmarks indicate which ports are members of the entry. Check or uncheck as needed to
modify the entry.
Buttons

Add a New Static Entry :
Click to add a new entry to the static MAC table. Specify the VLAN ID, MAC address, and