Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 204 / 321

Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
11-1.5 HTTPS
This page allows you to configure the HTTPS settings and maintain the current certificate on
the switch.
Web Interface
To configure an Access Management Configuration in the web interface:
1. Click Configuration, Security, Management and
HTTPS.
2. Specify the Certificate Maintain, Certificate Pass Phrase, Certificate Upload.
3. Chick Browser to select the file to upload.
4. Click Apply.
Figure 11-1.5: The HTTPS Configuration
Parameter description:

Certificate Maintain :
The operation of certificate maintenance.
Possible operations are:
Upload: Upload a certificate PEM file. Possible methods are: Web Browser or URL.
Generate: Generate a new self-signed RSA certificate.

Certificate Pass Phrase :
Enter the pass phrase in this field if your uploading certificate is protected by a specific
passphrase.

Certificate Upload :
Upload a certificate PEM file into the switch. The file should contain the certificate and
private key together. If you have two separated files for saving certificate and private key.
Use the Linux cat command to combine them into a single PEM file. For example, cat
my.cert my.key > my.pem
Notice that the RSA certificate is recommended since most of the new version of browsers
has removed support for DSA in certificate, e.g. Firefox v37 and Chrome v39.
Possible methods are:
Web Browser: Upload a certificate via Web browser.
URL: Upload a certificate via URL, the supported protocols are
HTTP , HTTPS , TFTP and FTP .
The URL format is <protocol>://[<username>[:<password>]@]< host>[:<port>]
[/<path>]/<file_name>. For example, tftp://10.10.10.10/new_image_path/new_image.dat,
http://username:password@10.10.10.10:80/new_image_path/new_image.dat. A valid file
name is a text string drawn from alphabet (A-Za-z), digits (0-9), dot (.), hyphen (-), under