Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 228 / 321

Ready: The limit is not yet reached. This can be shown for all actions .
Limit Reached: Indicates that the limit is reached on this port. This state can only be shown
if Action is set to none or Trap.
Shutdown: Indicates that the port is shut down by the Limit Control module. This state can
only be shown if Action is set to Shutdown or Trap & Shutdown.
Buttons

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.
11-5.2 Status
This section shows the Port Security status. Port Security is a module with no direct
configuration. Configuration comes indirectly from other modules - the user modules. When a
user module has enabled port security on a port, the port is set-up for software-based
learning. In this mode, frames from unknown MAC addresses are passed on to the port
security module, which in turn asks all user modules whether to allow this new MAC address
to forward or block it. For a MAC address to be set in the forwarding state, all enabled user
modules must unanimously agree on allowing the MAC address to forward. If only one
chooses to block it, it will be blocked until that user module decides otherwise. The status
page is divided into two sections - one with a legend of user modules and one with the actual
port status.
Web Interface
To displays a Port Security Status in the web interface:
Click Security, Port Security and status.
1.
Checked “Auto-refresh”.
2. Click “Refresh” to refresh the port detailed statistics.
3. Click the port number to see the status for this particular port.
Figure 11-5.2: The Port Security Status
Parameter description:

Port :
The port number for which the status applies. Click the port number to see the status for
this particular port.

Violation Mode
Shows the configured Violation Mode of the port. It can take one of four values: