Evidence Cross-8/HPoE-10G, Руководство пользователя

Страница: 172 / 321

Figure 9-2.5: The MLD SFM Information
Parameter description:
Navigating the MLD SFM Information Table
Each page shows up to 99 entries from the MLD SFM Information table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will
show the first 20 entries from the beginning of the MLD SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point
in the MLD SFM Information Table. Clicking the Refresh button will update the displayed
table starting from that or the closest next MLD SFM Information Table match. In addition,
the two input fields will - upon a Refresh button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start address.
The Next Page will use the last entry of the currently displayed table as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed
table. Use the First Page button to start over.

VLAN ID :
VLAN ID of the group.

Group :
IP Multicast Group address.

Port :
Switch port number.

Mode :
Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It
can be either Include or Exclude.

Source Address :
IP Address of the source. Currently, system limits the total number of IP source addresses
for filtering to be 128.

Type :
Indicates the Type. It can be either Allow or Deny.

Hardware Filter/Switch :
Indicates whether data plane destined to the specific group address from the source IPv6
address could be handled by chip or not.
Buttons
Figure 9-2.5: The MLD SFM Information buttons