OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-46
November 19, 2009
MODE (3L):
Display Doppler Status.
For
RDN85:
TEST, SILENCE, LAND, CALM SEA, SEA, MEMORY, SPEED NOT COMPUTED or
PREPOSITIONING INS.
For ANV353: INIT,OPER,MAINT,FAIL,********,blank
******** is displayed if “no activity” from the STATUS word.
Blank is displayed when the CMA-9000 FMS requests:
•
a boresight change.
•
or a BIT command.
The following fields are displayed only when the ANV353 DVS is configured.
BEAM STATUS (4L):
Displays the ANV-353 DVS beam status. Possible values for this field are: MEMORY,
3-BEAMS, 4-BEAMS.
RF MODE [4R]:
Sends the RF MODE to the ANV-353 DVS. Possible values for this field are: CONTINUOUS,
INTERMITENT, MUTE. When the command is sent, the status is displayed in large font. When received from
the DVS, the status is displayed in medium font.
STATUS (5L):
Displays the Surface status sent by the ANV-353 DVS. Possible values for this field are:
SEA/LAND. This field is displayed only when an ANV353 DVS is configured.
SURFACE [5R]:
Sends the surface type to the ANV-353 DVS. Possible values for this field are: LAND,
SEA, AUTO (if SURF CFG is set to AUTO) or LAND, SEA (if SURF CFG is set to MANUAL). This field is
displayed only when an ANV353 DVS is configured.
NAV STATUS [6L]:
Access to NAV STATUS INDEX 1/1 page.
DVS STATUS 2/2 (Only if DOPPLER is configured)
Display DVS STATUS 2/2 page by pressing [INIT REF], <NAV STATUS>, <DVS> and [NEXT].
The DVS STATUS 2/2 page displays water motion compensation entries and the resulting compensation values.
1R
2R
3R
4R
5R
6R
DVS STATUS 2/2
MAG
W I N D
>
1 2 8
o
/ 2 6 . 6
K T S
W A T E R C U R R E N T
280
o
/05.0
K T S
<
NAV STATUS
1L
2L
3L
4L
5L
6L
This page is printed under user's responsibility
and must not be retained for reference